|
|
Static analysis of the sports hall roof
Meissnerová, Sabina ; Hokeš, Filip (referee) ; Vlk, Zbyněk (advisor)
The final thesis deals with structural analysis of the roofing of the sports hall. Computational model was created in the computational software Dlubal RFEM 6.04 according to the provided documents. The loads were performed in accordance with valid standards and the structure was assessed for the ultimate and serviceability limit state. Manual assessment calculations were compared with the software. The final thesis deals with the manual calculation of internal forces on a curved beam from the self-weight of the structure and the stability of the structure is demonstrated first on a single-sided fixed beam and then on the created spatial model.
|
|
|
Design of exhibition hall roof
Němec, Petr ; Ing.Paris Chalivopulos (referee) ; Zich, Miloš (advisor)
The Diploma’s thesis is focused on the design of selected parts of reinforced concrete exhibition hall (prestressed concrete purlin, prestressed concrete girder, reinforced concrete column, reinforced concrete footing, post-tensioned concrete girders). The load calculation (the self weight, the permanent load, the wind load, the snow load and imposed load), the design and the review of selected reinforced concrete items and the drawing documentation are included in this thesis.
|
|
|
Design of load-bearing structures of residential building in Prague
Cetkovský, Jan ; Hrubý, Tomáš (referee) ; Požár, Michal (advisor)
The diploma thesis is aimed for design of load-bearing structures of residental building. The designed parts of building are reinforced concrete two way slab with lintels above 1th floor, reinforced concrete two way cantivelered slab above ground floor, reinforced concrete point-supported slab below ground floor, reinforced concrete columns in basement, reinforced concrete staircase in basement and static check of loadbearing walls in ground floor. The thesis contains static design, which is provided in calculated software RFEM Dlubal 5.07. The result of static design is drawing documentation of these calculated elements.
|
|
| |
|
|
Load bearing RC structure of office building
Ferencz, Balázs ; Zlámal, Martin (referee) ; Šimůnek, Petr (advisor)
The Master’s thesis is focused on the analysis and design of selected members of load-bearing structure of an administration building according to the ultimate limit states (ULS) and seviceability limit states (SLS). The calculation and the analysis was supported by design software SCIA ENGINEER 2012. Structural analysis deals with the design of the reinforced concrete (RC) flat slab above the 4rd strorey which is particularly supported by RC columns and particularly lies on RC walls. Furthermore, the Master’s thesis contains analysis of some selected columns of last three storeys, column of lowest storey, construction of stairway between 4rd and 5th storeys. The work beside this deals with the calculation and design of foundation of the object. The rest parts of the load-bearing structure are not solved in the Master’s thesis.
|
|
|
Building for sport purposes
Navrátil, Petr ; Štrba, Michal (referee) ; Pilgr, Milan (advisor)
The theme of this diploma thesis is design and check load-carrying steel structure of building for sport purposes in two variants. Building is situated in Holešov town. Primary emphasis is placed on purpose of this building and on her integration to the given locality. The steel structure is created by two objels, main (hall) and side part (admin. part). Both of this building have common east wall. Plan dimension of hall part is 40 on 40m and the highest point of this part is 15,9m height above ground. Admin. part is greated like frame with columns in 8x8m grid and 8m height. Overall height of this part is 8m. For analisys of internal forces was constructed spatial bar model which was used for an optimization of partial bars for both limit states. The cladding will be made by system of Kingspan panels.
|
|
|
Design of load-bearing structures of residential building in Prague
Cetkovský, Jan ; Hrubý, Tomáš (referee) ; Požár, Michal (advisor)
The diploma thesis is aimed for design of load-bearing structures of residental building. The designed parts of building are reinforced concrete two way slab with lintels above 1th floor, reinforced concrete two way cantivelered slab above ground floor, reinforced concrete point-supported slab below ground floor, reinforced concrete columns in basement, reinforced concrete staircase in basement and static check of loadbearing walls in ground floor. The thesis contains static design, which is provided in calculated software RFEM Dlubal 5.07. The result of static design is drawing documentation of these calculated elements.
|
|
| |
|
|
Load bearing RC structure of office building
Ferencz, Balázs ; Zlámal, Martin (referee) ; Šimůnek, Petr (advisor)
The Master’s thesis is focused on the analysis and design of selected members of load-bearing structure of an administration building according to the ultimate limit states (ULS) and seviceability limit states (SLS). The calculation and the analysis was supported by design software SCIA ENGINEER 2012. Structural analysis deals with the design of the reinforced concrete (RC) flat slab above the 4rd strorey which is particularly supported by RC columns and particularly lies on RC walls. Furthermore, the Master’s thesis contains analysis of some selected columns of last three storeys, column of lowest storey, construction of stairway between 4rd and 5th storeys. The work beside this deals with the calculation and design of foundation of the object. The rest parts of the load-bearing structure are not solved in the Master’s thesis.
|
|
|
Design of exhibition hall roof
Němec, Petr ; Ing.Paris Chalivopulos (referee) ; Zich, Miloš (advisor)
The Diploma’s thesis is focused on the design of selected parts of reinforced concrete exhibition hall (prestressed concrete purlin, prestressed concrete girder, reinforced concrete column, reinforced concrete footing, post-tensioned concrete girders). The load calculation (the self weight, the permanent load, the wind load, the snow load and imposed load), the design and the review of selected reinforced concrete items and the drawing documentation are included in this thesis.
|
guest ::
